Contract 0x9ba0b32330cf0c623a98fc773f79b9513196b6fe

/**
 *Submitted for verification at cronoscan.com on 2022-01-28
*/

// Dependency file: @openzeppelin/contracts/utils/Context.sol

// SPDX-License-Identifier: MIT

// pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// Dependency file: @openzeppelin/contracts/token/ERC20/IERC20.sol


// pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// Dependency file: @openzeppelin/contracts/math/SafeMath.sol


// pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// Dependency file: @openzeppelin/contracts/token/ERC20/ERC20.sol


// pragma solidity >=0.6.0 <0.8.0;

// import "@openzeppelin/contracts/utils/Context.sol";
// import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// Dependency file: @openzeppelin/contracts/utils/Address.sol


// pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// Dependency file: @openzeppelin/contracts/token/ERC20/SafeERC20.sol


// pragma solidity >=0.6.0 <0.8.0;

// import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "@openzeppelin/contracts/math/SafeMath.sol";
// import "@openzeppelin/contracts/utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// Dependency file: @openzeppelin/contracts/access/Ownable.sol


// pragma solidity >=0.6.0 <0.8.0;

// import "@openzeppelin/contracts/utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// Dependency file: @openzeppelin/contracts/utils/ReentrancyGuard.sol


// pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}


// Root file: contracts/staking/SmartChefInitializable.sol

pragma solidity 0.6.12;

// import '/Users/miikey/Documents/defispace/hexlab/cronaswapv1/cronaswap-protocol/node_modules/@openzeppelin/contracts/token/ERC20/ERC20.sol';
// import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
// import "@openzeppelin/contracts/math/SafeMath.sol";
// import "@openzeppelin/contracts/access/Ownable.sol";
// import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

contract SmartChefInitializable is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The address of the smart chef factory
    address public SMART_CHEF_FACTORY;

    // Whether a limit is set for users
    bool public hasUserLimit;

    // Whether it is initialized
    bool public isInitialized;

    // Accrued token per share
    uint256 public accTokenPerShare;

    // The block number when CRONA mining ends.
    uint256 public bonusEndBlock;

    // The block number when CRONA mining starts.
    uint256 public startBlock;

    // The block number of the last pool update
    uint256 public lastRewardBlock;

    // The pool limit (0 if none)
    uint256 public poolLimitPerUser;

    // CRONA tokens created per block.
    uint256 public rewardPerBlock;

    // The precision factor
    uint256 public PRECISION_FACTOR;

    // The reward token
    IERC20 public rewardToken;

    // The staked token
    IERC20 public stakedToken;

    // Info of each user that stakes tokens (stakedToken)
    mapping(address => UserInfo) public userInfo;

    struct UserInfo {
        uint256 amount; // How many staked tokens the user has provided
        uint256 rewardDebt; // Reward debt
    }

    event AdminTokenRecovery(address tokenRecovered, uint256 amount);
    event Deposit(address indexed user, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 amount);
    event NewStartAndEndBlocks(uint256 startBlock, uint256 endBlock);
    event NewRewardPerBlock(uint256 rewardPerBlock);
    event NewPoolLimit(uint256 poolLimitPerUser);
    event RewardsStop(uint256 blockNumber);
    event Withdraw(address indexed user, uint256 amount);

    constructor() public {
        SMART_CHEF_FACTORY = msg.sender;
    }

    /*
     * @notice Initialize the contract
     * @param _stakedToken: staked token address
     * @param _rewardToken: reward token address
     * @param _rewardPerBlock: reward per block (in rewardToken)
     * @param _startBlock: start block
     * @param _bonusEndBlock: end block
     * @param _poolLimitPerUser: pool limit per user in stakedToken (if any, else 0)
     * @param _admin: admin address with ownership
     */
    function initialize(
        IERC20 _stakedToken,
        IERC20 _rewardToken,
        uint256 _rewardPerBlock,
        uint256 _startBlock,
        uint256 _bonusEndBlock,
        uint256 _poolLimitPerUser,
        address _admin
    ) external {
        require(!isInitialized, "Already initialized");
        require(msg.sender == SMART_CHEF_FACTORY, "Not factory");

        // Make this contract initialized
        isInitialized = true;

        stakedToken = _stakedToken;
        rewardToken = _rewardToken;
        rewardPerBlock = _rewardPerBlock;
        startBlock = _startBlock;
        bonusEndBlock = _bonusEndBlock;

        if (_poolLimitPerUser > 0) {
            hasUserLimit = true;
            poolLimitPerUser = _poolLimitPerUser;
        }

        uint256 decimalsRewardToken = uint256(ERC20(address(rewardToken)).decimals());
        require(decimalsRewardToken < 30, "Must be inferior to 30");

        PRECISION_FACTOR = uint256(10**(uint256(30).sub(decimalsRewardToken)));

        // Set the lastRewardBlock as the startBlock
        lastRewardBlock = startBlock;

        // Transfer ownership to the admin address who becomes owner of the contract
        transferOwnership(_admin);
    }

    /*
     * @notice Deposit staked tokens and collect reward tokens (if any)
     * @param _amount: amount to withdraw (in rewardToken)
     */
    function deposit(uint256 _amount) external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];

        if (hasUserLimit) {
            require(_amount.add(user.amount) <= poolLimitPerUser, "User amount above limit");
        }

        _updatePool();

        if (user.amount > 0) {
            uint256 pending = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
            if (pending > 0) {
                rewardToken.safeTransfer(address(msg.sender), pending);
            }
        }

        if (_amount > 0) {
            user.amount = user.amount.add(_amount);
            stakedToken.safeTransferFrom(address(msg.sender), address(this), _amount);
        }

        user.rewardDebt = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR);

        emit Deposit(msg.sender, _amount);
    }

    /*
     * @notice Withdraw staked tokens and collect reward tokens
     * @param _amount: amount to withdraw (in rewardToken)
     */
    function withdraw(uint256 _amount) external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];
        require(user.amount >= _amount, "Amount to withdraw too high");

        _updatePool();

        uint256 pending = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);

        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            stakedToken.safeTransfer(address(msg.sender), _amount);
        }

        if (pending > 0) {
            rewardToken.safeTransfer(address(msg.sender), pending);
        }

        user.rewardDebt = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR);

        emit Withdraw(msg.sender, _amount);
    }

    /*
     * @notice Withdraw staked tokens without caring about rewards rewards
     * @dev Needs to be for emergency.
     */
    function emergencyWithdraw() external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];
        uint256 amountToTransfer = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;

        if (amountToTransfer > 0) {
            stakedToken.safeTransfer(address(msg.sender), amountToTransfer);
        }

        emit EmergencyWithdraw(msg.sender, user.amount);
    }

    /*
     * @notice Stop rewards
     * @dev Only callable by owner. Needs to be for emergency.
     */
    function emergencyRewardWithdraw(uint256 _amount) external onlyOwner {
        rewardToken.safeTransfer(address(msg.sender), _amount);
    }

    /**
     * @notice It allows the admin to recover wrong tokens sent to the contract
     * @param _tokenAddress: the address of the token to withdraw
     * @param _tokenAmount: the number of tokens to withdraw
     * @dev This function is only callable by admin.
     */
    function recoverWrongTokens(address _tokenAddress, uint256 _tokenAmount) external onlyOwner {
        require(_tokenAddress != address(stakedToken), "Cannot be staked token");
        require(_tokenAddress != address(rewardToken), "Cannot be reward token");

        IERC20(_tokenAddress).safeTransfer(address(msg.sender), _tokenAmount);

        emit AdminTokenRecovery(_tokenAddress, _tokenAmount);
    }

    /*
     * @notice Stop rewards
     * @dev Only callable by owner
     */
    function stopReward() external onlyOwner {
        bonusEndBlock = block.number;
    }

    /*
     * @notice Update pool limit per user
     * @dev Only callable by owner.
     * @param _hasUserLimit: whether the limit remains forced
     * @param _poolLimitPerUser: new pool limit per user
     */
    function updatePoolLimitPerUser(bool _hasUserLimit, uint256 _poolLimitPerUser) external onlyOwner {
        require(hasUserLimit, "Must be set");
        if (_hasUserLimit) {
            require(_poolLimitPerUser > poolLimitPerUser, "New limit must be higher");
            poolLimitPerUser = _poolLimitPerUser;
        } else {
            hasUserLimit = _hasUserLimit;
            poolLimitPerUser = 0;
        }
        emit NewPoolLimit(poolLimitPerUser);
    }

    /*
     * @notice Update reward per block
     * @dev Only callable by owner.
     * @param _rewardPerBlock: the reward per block
     */
    function updateRewardPerBlock(uint256 _rewardPerBlock) external onlyOwner {
        require(block.number < startBlock, "Pool has started");
        rewardPerBlock = _rewardPerBlock;
        emit NewRewardPerBlock(_rewardPerBlock);
    }

    /**
     * @notice It allows the admin to update start and end blocks
     * @dev This function is only callable by owner.
     * @param _startBlock: the new start block
     * @param _bonusEndBlock: the new end block
     */
    function updateStartAndEndBlocks(uint256 _startBlock, uint256 _bonusEndBlock) external onlyOwner {
        require(block.number < startBlock, "Pool has started");
        require(_startBlock < _bonusEndBlock, "New startBlock must be lower than new endBlock");
        require(block.number < _startBlock, "New startBlock must be higher than current block");

        startBlock = _startBlock;
        bonusEndBlock = _bonusEndBlock;

        // Set the lastRewardBlock as the startBlock
        lastRewardBlock = startBlock;

        emit NewStartAndEndBlocks(_startBlock, _bonusEndBlock);
    }

    /*
     * @notice View function to see pending reward on frontend.
     * @param _user: user address
     * @return Pending reward for a given user
     */
    function pendingReward(address _user) external view returns (uint256) {
        UserInfo storage user = userInfo[_user];
        uint256 stakedTokenSupply = stakedToken.balanceOf(address(this));
        if (block.number > lastRewardBlock && stakedTokenSupply != 0) {
            uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
            uint256 cronaReward = multiplier.mul(rewardPerBlock);
            uint256 adjustedTokenPerShare =
                accTokenPerShare.add(cronaReward.mul(PRECISION_FACTOR).div(stakedTokenSupply));
            return user.amount.mul(adjustedTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
        } else {
            return user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
        }
    }

    /*
     * @notice Update reward variables of the given pool to be up-to-date.
     */
    function _updatePool() internal {
        if (block.number <= lastRewardBlock) {
            return;
        }

        uint256 stakedTokenSupply = stakedToken.balanceOf(address(this));

        if (stakedTokenSupply == 0) {
            lastRewardBlock = block.number;
            return;
        }

        uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
        uint256 cronaReward = multiplier.mul(rewardPerBlock);
        accTokenPerShare = accTokenPerShare.add(cronaReward.mul(PRECISION_FACTOR).div(stakedTokenSupply));
        lastRewardBlock = block.number;
    }

    /*
     * @notice Return reward multiplier over the given _from to _to block.
     * @param _from: block to start
     * @param _to: block to finish
     */
    function _getMultiplier(uint256 _from, uint256 _to) internal view returns (uint256) {
        if (_to <= bonusEndBlock) {
            return _to.sub(_from);
        } else if (_from >= bonusEndBlock) {
            return 0;
        } else {
            return bonusEndBlock.sub(_from);
        }
    }
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"tokenRecovered","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"AdminTokenRecovery","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"poolLimitPerUser","type":"uint256"}],"name":"NewPoolLimit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"rewardPerBlock","type":"uint256"}],"name":"NewRewardPerBlock","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"startBlock","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"endBlock","type":"uint256"}],"name":"NewStartAndEndBlocks","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"blockNumber","type":"uint256"}],"name":"RewardsStop","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"PRECISION_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SMART_CHEF_FACTORY","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"accTokenPerShare","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"bonusEndBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"emergencyRewardWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"hasUserLimit","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_stakedToken","type":"address"},{"internalType":"contract IERC20","name":"_rewardToken","type":"address"},{"internalType":"uint256","name":"_rewardPerBlock","type":"uint256"},{"internalType":"uint256","name":"_startBlock","type":"uint256"},{"internalType":"uint256","name":"_bonusEndBlock","type":"uint256"},{"internalType":"uint256","name":"_poolLimitPerUser","type":"uint256"},{"internalType":"address","name":"_admin","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isInitialized","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastRewardBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"}],"name":"pendingReward","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLimitPerUser","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_tokenAddress","type":"address"},{"internalType":"uint256","name":"_tokenAmount","type":"uint256"}],"name":"recoverWrongTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stakedToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stopReward","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_hasUserLimit","type":"bool"},{"internalType":"uint256","name":"_poolLimitPerUser","type":"uint256"}],"name":"updatePoolLimitPerUser","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_rewardPerBlock","type":"uint256"}],"name":"updateRewardPerBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_startBlock","type":"uint256"},{"internalType":"uint256","name":"_bonusEndBlock","type":"uint256"}],"name":"updateStartAndEndBlocks","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

40178:11259:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48185:240;;;;;;;;;;;;;;;;-1:-1:-1;48185:240:0;;:::i;:::-;;41273:44;;;;;;;;;;;;;;;;-1:-1:-1;41273:44:0;-1:-1:-1;;;;;41273:44:0;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;40664:28;;;:::i;:::-;;;;;;;;;;;;;;;;44908:732;;;;;;;;;;;;;;;;-1:-1:-1;44908:732:0;;:::i;46306:142::-;;;;;;;;;;;;;;;;-1:-1:-1;46306:142:0;;:::i;40509:25::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;46738:413;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;46738:413:0;;;;;;;;:::i;40752:25::-;;;:::i;40909:31::-;;;:::i;36363:148::-;;;:::i;47241:88::-;;;:::i;42475:1255::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;42475:1255:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;40989:29::-;;;:::i;35712:87::-;;;:::i;:::-;;;;-1:-1:-1;;;;;35712:87:0;;;;;;;;;;;;;;40575:31;;;:::i;40442:24::-;;;:::i;48669:606::-;;;;;;;;;;;;;;;;-1:-1:-1;48669:606:0;;;;;;;:::i;47555:475::-;;;;;;;;;;;;;;;;-1:-1:-1;47555:475:0;;;;;;;;;:::i;40835:30::-;;;:::i;43888:870::-;;;;;;;;;;;;;;;;-1:-1:-1;43888:870:0;;:::i;40359:33::-;;;:::i;41180:25::-;;;:::i;41056:31::-;;;:::i;45781:407::-;;;:::i;36666:244::-;;;;;;;;;;;;;;;;-1:-1:-1;36666:244:0;-1:-1:-1;;;;;36666:244:0;;:::i;49448:796::-;;;;;;;;;;;;;;;;-1:-1:-1;49448:796:0;-1:-1:-1;;;;;49448:796:0;;:::i;41121:25::-;;;:::i;48185:240::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;48293:10:::1;;48278:12;:25;48270:54;;;::::0;;-1:-1:-1;;;48270:54:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;48270:54:0;;;;;;;;;;;;;::::1;;48335:14;:32:::0;;;48383:34:::1;::::0;;;;;;;::::1;::::0;;;;::::1;::::0;;::::1;48185:240:::0;:::o;41273:44::-;;;;;;;;;;;;;;;;;;;:::o;40664:28::-;;;;:::o;44908:732::-;38683:1;39289:7;;:19;;39281:63;;;;;-1:-1:-1;;;39281:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;38683:1;39422:7;:18;45009:10:::1;44976:21;45000:20:::0;;;:8:::1;:20;::::0;;;;45039:11;;:22;-1:-1:-1;45039:22:0::1;45031:62;;;::::0;;-1:-1:-1;;;45031:62:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;45106:13;:11;:13::i;:::-;45132:15;45150:76;45210:4;:15;;;45150:55;45188:16;;45150:33;45166:16;;45150:4;:11;;;:15;;:33;;;;:::i;:::-;:37:::0;::::1;:55::i;:::-;:59:::0;::::1;:76::i;:::-;45132:94:::0;-1:-1:-1;45243:11:0;;45239:151:::1;;45285:11:::0;;:24:::1;::::0;45301:7;45285:15:::1;:24::i;:::-;45271:38:::0;;45324:11:::1;::::0;:54:::1;::::0;-1:-1:-1;;;;;45324:11:0::1;45357:10;45370:7:::0;45324:24:::1;:54::i;:::-;45406:11:::0;;45402:98:::1;;45434:11;::::0;:54:::1;::::0;-1:-1:-1;;;;;45434:11:0::1;45467:10;45480:7:::0;45434:24:::1;:54::i;:::-;45568:16;::::0;45546::::1;::::0;45530:11;;:55:::1;::::0;45568:16;45530:33:::1;::::0;:11;:15:::1;:33::i;:55::-;45512:15;::::0;::::1;:73:::0;45603:29:::1;::::0;;;;;;;45612:10:::1;::::0;45603:29:::1;::::0;;;;;::::1;::::0;;::::1;-1:-1:-1::0;;38639:1:0;39601:22;;-1:-1:-1;44908:732:0:o;46306:142::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;46386:11:::1;::::0;:54:::1;::::0;-1:-1:-1;;;;;46386:11:0::1;46419:10;46432:7:::0;46386:24:::1;:54::i;:::-;46306:142:::0;:::o;40509:25::-;;;-1:-1:-1;;;40509:25:0;;;;;:::o;46738:413::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;46874:11:::1;::::0;-1:-1:-1;;;;;46849:37:0;;::::1;46874:11:::0;::::1;46849:37;;46841:72;;;::::0;;-1:-1:-1;;;46841:72:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46841:72:0;;;;;;;;;;;;;::::1;;46957:11;::::0;-1:-1:-1;;;;;46932:37:0;;::::1;46957:11:::0;::::1;46932:37;;46924:72;;;::::0;;-1:-1:-1;;;46924:72:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;46924:72:0;;;;;;;;;;;;;::::1;;47009:69;-1:-1:-1::0;;;;;47009:34:0;::::1;47052:10;47065:12:::0;47009:34:::1;:69::i;:::-;47096:47;::::0;;-1:-1:-1;;;;;47096:47:0;::::1;::::0;;::::1;::::0;::::1;::::0;;;;;::::1;::::0;;;;;;;;;::::1;46738:413:::0;;:::o;40752:25::-;;;;:::o;40909:31::-;;;;:::o;36363:148::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;36470:1:::1;36454:6:::0;;36433:40:::1;::::0;-1:-1:-1;;;;;36454:6:0;;::::1;::::0;36433:40:::1;::::0;36470:1;;36433:40:::1;36501:1;36484:19:::0;;-1:-1:-1;;;;;;36484:19:0::1;::::0;;36363:148::o;47241:88::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;47309:12:::1;47293:13;:28:::0;47241:88::o;42475:1255::-;42749:13;;-1:-1:-1;;;42749:13:0;;;;42748:14;42740:46;;;;;-1:-1:-1;;;42740:46:0;;;;;;;;;;;;-1:-1:-1;;;42740:46:0;;;;;;;;;;;;;;;42819:18;;-1:-1:-1;;;;;42819:18:0;42805:10;:32;42797:56;;;;;-1:-1:-1;;;42797:56:0;;;;;;;;;;;;-1:-1:-1;;;42797:56:0;;;;;;;;;;;;;;;42909:13;:20;;-1:-1:-1;;;;42909:20:0;-1:-1:-1;;;42909:20:0;;;42942:11;:26;;-1:-1:-1;;;;;42942:26:0;;;-1:-1:-1;;;;;;42942:26:0;;;;;;;42979:11;:26;;;;;;;;;;;;;;;43016:14;:32;;;43059:10;:24;;;43094:13;:30;;;43141:21;;43137:124;;43179:12;:19;;-1:-1:-1;;;;43179:19:0;-1:-1:-1;;;43179:19:0;;;43213:16;:36;;;43137:124;43325:11;;43311:38;;;-1:-1:-1;;;43311:38:0;;;;43273:27;;-1:-1:-1;;;;;43325:11:0;;43311:36;;:38;;;;;;;;;;;;;;43325:11;43311:38;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;43311:38:0;43303:47;;;-1:-1:-1;43391:2:0;43369:24;;43361:59;;;;;-1:-1:-1;;;43361:59:0;;;;;;;;;;;;-1:-1:-1;;;43361:59:0;;;;;;;;;;;;;;;43465:36;43473:2;43481:19;43465:15;:36::i;:::-;43460:2;:42;43433:16;:70;43588:10;;43570:15;:28;43697:25;43715:6;43697:17;:25::i;:::-;42475:1255;;;;;;;;:::o;40989:29::-;;;;:::o;35712:87::-;35758:7;35785:6;-1:-1:-1;;;;;35785:6:0;35712:87;:::o;40575:31::-;;;;:::o;40442:24::-;;;-1:-1:-1;;;40442:24:0;;;;;:::o;48669:606::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;48800:10:::1;;48785:12;:25;48777:54;;;::::0;;-1:-1:-1;;;48777:54:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;48777:54:0;;;;;;;;;;;;;::::1;;48864:14;48850:11;:28;48842:87;;;;-1:-1:-1::0;;;48842:87:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48963:11;48948:12;:26;48940:87;;;;-1:-1:-1::0;;;48940:87:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49040:10;:24:::0;;;49075:13:::1;:30:::0;;;49172:15:::1;:28:::0;;;49218:49:::1;::::0;;;;;::::1;::::0;::::1;::::0;;;;;::::1;::::0;;;;;;;;;::::1;48669:606:::0;;:::o;47555:475::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;47672:12:::1;::::0;-1:-1:-1;;;47672:12:0;::::1;;;47664:36;;;::::0;;-1:-1:-1;;;47664:36:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;47664:36:0;;;;;;;;;;;;;::::1;;47715:13;47711:266;;;47773:16;;47753:17;:36;47745:73;;;::::0;;-1:-1:-1;;;47745:73:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;47833:16;:36:::0;;;47711:266:::1;;;47902:12;:28:::0;;-1:-1:-1;;;;47902:28:0::1;-1:-1:-1::0;;;47902:28:0;::::1;;;;::::0;;-1:-1:-1;47945:16:0::1;:20:::0;47711:266:::1;48005:16;::::0;47992:30:::1;::::0;;;;;;::::1;::::0;;;;::::1;::::0;;::::1;47555:475:::0;;:::o;40835:30::-;;;;:::o;43888:870::-;38683:1;39289:7;;:19;;39281:63;;;;;-1:-1:-1;;;39281:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;38683:1;39422:7;:18;;;43988:10:::1;43955:21;43979:20:::0;;;:8:::1;:20;::::0;;;;44016:12;;-1:-1:-1;;;44016:12:0;::::1;;;44012:125;;;44081:16;::::0;44065:11;;44053:24:::1;::::0;:7;;:11:::1;:24::i;:::-;:44;;44045:80;;;::::0;;-1:-1:-1;;;44045:80:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;44149:13;:11;:13::i;:::-;44179:11:::0;;:15;44175:262:::1;;44211:15;44229:76;44289:4;:15;;;44229:55;44267:16;;44229:33;44245:16;;44229:4;:11;;;:15;;:33;;;;:::i;:76::-;44211:94:::0;-1:-1:-1;44324:11:0;;44320:106:::1;;44356:11;::::0;:54:::1;::::0;-1:-1:-1;;;;;44356:11:0::1;44389:10;44402:7:::0;44356:24:::1;:54::i;:::-;44175:262;;44453:11:::0;;44449:170:::1;;44495:11:::0;;:24:::1;::::0;44511:7;44495:15:::1;:24::i;:::-;44481:38:::0;;44534:11:::1;::::0;:73:::1;::::0;-1:-1:-1;;;;;44534:11:0::1;44571:10;44592:4;44599:7:::0;44534:28:::1;:73::i;:::-;44687:16;::::0;44665::::1;::::0;44649:11;;:55:::1;::::0;44687:16;44649:33:::1;::::0;:11;:15:::1;:33::i;:55::-;44631:15;::::0;::::1;:73:::0;44722:28:::1;::::0;;;;;;;44730:10:::1;::::0;44722:28:::1;::::0;;;;;::::1;::::0;;::::1;-1:-1:-1::0;;38639:1:0;39601:22;;43888:870::o;40359:33::-;;;-1:-1:-1;;;;;40359:33:0;;:::o;41180:25::-;;;-1:-1:-1;;;;;41180:25:0;;:::o;41056:31::-;;;;:::o;45781:407::-;38683:1;39289:7;;:19;;39281:63;;;;;-1:-1:-1;;;39281:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;38683:1;39422:7;:18;;;45876:10:::1;45843:21;45867:20:::0;;;:8:::1;:20;::::0;;;;45925:11;;45947:15;;;45973;;::::1;:19:::0;;;;45867:20;46009;;46005:116:::1;;46046:11;::::0;:63:::1;::::0;-1:-1:-1;;;;;46046:11:0::1;46079:10;46092:16:::0;46046:24:::1;:63::i;:::-;46168:11:::0;;46138:42:::1;::::0;;;;;;46156:10:::1;::::0;46138:42:::1;::::0;;;;;::::1;::::0;;::::1;-1:-1:-1::0;;38639:1:0;39601:22;;45781:407::o;36666:244::-;35943:12;:10;:12::i;:::-;-1:-1:-1;;;;;35932:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;35932:23:0;;35924:68;;;;;-1:-1:-1;;;35924:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;35924:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;36755:22:0;::::1;36747:73;;;;-1:-1:-1::0;;;36747:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;36857:6;::::0;;36836:38:::1;::::0;-1:-1:-1;;;;;36836:38:0;;::::1;::::0;36857:6;::::1;::::0;36836:38:::1;::::0;::::1;36885:6;:17:::0;;-1:-1:-1;;;;;;36885:17:0::1;-1:-1:-1::0;;;;;36885:17:0;;;::::1;::::0;;;::::1;::::0;;36666:244::o;49448:796::-;-1:-1:-1;;;;;49553:15:0;;;49509:7;49553:15;;;:8;:15;;;;;;;;49607:11;;:36;;-1:-1:-1;;;49607:36:0;;49637:4;49607:36;;;;;;49509:7;;49553:15;;49509:7;;49607:11;;;;;:21;;:36;;;;;49553:15;49607:36;;;;;:11;:36;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;49607:36:0;49673:15;;49607:36;;-1:-1:-1;49658:12:0;:30;:56;;;;-1:-1:-1;49692:22:0;;;49658:56;49654:583;;;49731:18;49752:45;49767:15;;49784:12;49752:14;:45::i;:::-;49731:66;;49812:19;49834:30;49849:14;;49834:10;:14;;:30;;;;:::i;:::-;49812:52;;49879:29;49928:78;49949:56;49987:17;49949:33;49965:16;;49949:11;:15;;:33;;;;:::i;:56::-;49928:16;;;:20;:78::i;:::-;49879:127;;50028:81;50093:4;:15;;;50028:60;50071:16;;50028:38;50044:21;50028:4;:11;;;:15;;:38;;;;:::i;:81::-;50021:88;;;;;;;;;49654:583;50149:76;50209:4;:15;;;50149:55;50187:16;;50149:33;50165:16;;50149:4;:11;;;:15;;:33;;;;:::i;:76::-;50142:83;;;;49448:796;;;;:::o;41121:25::-;;;-1:-1:-1;;;;;41121:25:0;;:::o;681:106::-;769:10;681:106;:::o;50345:606::-;50408:15;;50392:12;:31;50388:70;;50440:7;;50388:70;50498:11;;:36;;;-1:-1:-1;;;50498:36:0;;50528:4;50498:36;;;;;;50470:25;;-1:-1:-1;;;;;50498:11:0;;:21;;:36;;;;;;;;;;;;;;:11;:36;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;50498:36:0;;-1:-1:-1;50551:22:0;50547:106;;-1:-1:-1;50608:12:0;50590:15;:30;50635:7;;50547:106;50665:18;50686:45;50701:15;;50718:12;50686:14;:45::i;:::-;50665:66;;50742:19;50764:30;50779:14;;50764:10;:14;;:30;;;;:::i;:::-;50742:52;;50824:78;50845:56;50883:17;50845:33;50861:16;;50845:11;:15;;:33;;;;:::i;50824:78::-;50805:16;:97;-1:-1:-1;;50931:12:0;50913:15;:30;-1:-1:-1;50345:606:0;:::o;7550:220::-;7608:7;7632:6;7628:20;;-1:-1:-1;7647:1:0;7640:8;;7628:20;7671:5;;;7675:1;7671;:5;:1;7695:5;;;;;:10;7687:56;;;;-1:-1:-1;;;7687:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7761:1;-1:-1:-1;7550:220:0;;;;;:::o;8248:153::-;8306:7;8338:1;8334;:5;8326:44;;;;;-1:-1:-1;;;8326:44:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;8392:1;8388;:5;;;;;;;8248:153;-1:-1:-1;;;8248:153:0:o;7133:158::-;7191:7;7224:1;7219;:6;;7211:49;;;;;-1:-1:-1;;;7211:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;7278:5:0;;;7133:158::o;31458:177::-;31568:58;;;-1:-1:-1;;;;;31568:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;31568:58:0;-1:-1:-1;;;31568:58:0;;;31541:86;;31561:5;;31541:19;:86::i;:::-;31458:177;;;:::o;6671:179::-;6729:7;6761:5;;;6785:6;;;;6777:46;;;;;-1:-1:-1;;;6777:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;31643:205;31771:68;;;-1:-1:-1;;;;;31771:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;31771:68:0;-1:-1:-1;;;31771:68:0;;;31744:96;;31764:5;;31744:19;:96::i;:::-;31643:205;;;;:::o;51125:309::-;51200:7;51231:13;;51224:3;:20;51220:207;;51268:14;:3;51276:5;51268:7;:14::i;:::-;51261:21;;;;51220:207;51313:13;;51304:5;:22;51300:127;;-1:-1:-1;51350:1:0;51343:8;;51300:127;51391:13;;:24;;51409:5;51391:17;:24::i;33763:761::-;34187:23;34213:69;34241:4;34213:69;;;;;;;;;;;;;;;;;34221:5;-1:-1:-1;;;;;34213:27:0;;;:69;;;;;:::i;:::-;34297:17;;34187:95;;-1:-1:-1;34297:21:0;34293:224;;34439:10;34428:30;;;;;;;;;;;;;;;-1:-1:-1;34428:30:0;34420:85;;;;-1:-1:-1;;;34420:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26268:195;26371:12;26403:52;26425:6;26433:4;26439:1;26442:12;26403:21;:52::i;:::-;26396:59;;26268:195;;;;;;:::o;27320:530::-;27447:12;27505:5;27480:21;:30;;27472:81;;;;-1:-1:-1;;;27472:81:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27572:18;27583:6;27572:10;:18::i;:::-;27564:60;;;;;-1:-1:-1;;;27564:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;27698:12;27712:23;27739:6;-1:-1:-1;;;;;27739:11:0;27759:5;27767:4;27739:33;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;27739:33:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27697:75;;;;27790:52;27808:7;27817:10;27829:12;27790:17;:52::i;:::-;27783:59;27320:530;-1:-1:-1;;;;;;;27320:530:0:o;23350:422::-;23717:20;23756:8;;;23350:422::o;29860:742::-;29975:12;30004:7;30000:595;;;-1:-1:-1;30035:10:0;30028:17;;30000:595;30149:17;;:21;30145:439;;30412:10;30406:17;30473:15;30460:10;30456:2;30452:19;30445:44;30360:148;30555:12;30548:20;;-1:-1:-1;;;30548:20:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ipfs://b712b3ca6dc8c110953dd81c54ccfe2d7bbf9899374067ccabcabb13a68c2eac