Contract 0x8216E362d07741b562eBB02C61b1659B6B1258aD

/**
 *Submitted for verification at cronoscan.com on 2022-04-20
*/

// Using  "@openzeppelin/contracts": "^3.1.0"

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/GSN/Context.sol

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}



pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol



pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contracts/VersaBar.sol

pragma solidity 0.6.12;





contract VersaBar is ERC20("VersaBar", "xVERSA"){
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    IERC20 immutable public versa;

    // Define the Versa token contract
    constructor(IERC20 _versa) public {
        versa = _versa;
    }

    // Enter the bar. Pay some VERSAs. Earn some shares.
    // Locks Versa and mints xVersa
    function enter(uint256 _amount) public {
        // Gets the amount of Versa locked in the contract
        uint256 totalVersa = versa.balanceOf(address(this));
        // Gets the amount of xVersa in existence
        uint256 totalShares = totalSupply();
        // If no xVersa exists, mint it 1:1 to the amount put in
        if (totalShares == 0 || totalVersa == 0) {
            _mint(msg.sender, _amount);
        } 
        // Calculate and mint the amount of xVersa the Versa is worth. The ratio will change overtime, as xVersa is burned/minted and Versa deposited + gained from fees / withdrawn.
        else {
            uint256 what = _amount.mul(totalShares).div(totalVersa);
            _mint(msg.sender, what);
        }
        // Lock the Versa in the contract
        versa.safeTransferFrom(msg.sender, address(this), _amount);
    }

    // Leave the bar. Claim back your VERSAs.
    // Unlocks the staked + gained Versa and burns xVersa
    function leave(uint256 _share) public {
        // Gets the amount of xVersa in existence
        uint256 totalShares = totalSupply();
        // Calculates the amount of Versa the xVersa is worth
        uint256 what = _share.mul(versa.balanceOf(address(this))).div(totalShares);
        _burn(msg.sender, _share);
        versa.safeTransfer(msg.sender, what);
    }
}

[{"inputs":[{"internalType":"contract IERC20","name":"_versa","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"enter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_share","type":"uint256"}],"name":"leave","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"versa","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

60a06040523480156200001157600080fd5b506040516200153d3803806200153d833981810160405260208110156200003757600080fd5b505160408051808201825260088152672b32b939b0a130b960c11b60208281019182528351808501909452600684526578564552534160d01b9084015281519192916200008791600391620000c5565b5080516200009d906004906020840190620000c5565b505060058054601260ff199091161790555060601b6001600160601b03191660805262000161565b828054600181600116156101000203166002900490600052602060002090601f016020900481019282601f106200010857805160ff191683800117855562000138565b8280016001018555821562000138579182015b82811115620001385782518255916020019190600101906200011b565b50620001469291506200014a565b5090565b5b808211156200014657600081556001016200014b565b60805160601c6113aa620001936000398061050952806105c6528061060f52806106fe52806107ed52506113aa6000f3fe608060405234801561001057600080fd5b50600436106100ea5760003560e01c806370a082311161008c578063a457c2d711610066578063a457c2d7146102b7578063a59f3e0c146102e3578063a9059cbb14610300578063dd62ed3e1461032c576100ea565b806370a082311461026557806390f62c541461028b57806395d89b41146102af576100ea565b806323b872dd116100c857806323b872dd146101c6578063313ce567146101fc578063395093511461021a57806367dfd4c914610246576100ea565b806306fdde03146100ef578063095ea7b31461016c57806318160ddd146101ac575b600080fd5b6100f761035a565b6040805160208082528351818301528351919283929083019185019080838360005b83811015610131578181015183820152602001610119565b50505050905090810190601f16801561015e5780820380516001836020036101000a031916815260200191505b509250505060405180910390f35b6101986004803603604081101561018257600080fd5b506001600160a01b0381351690602001356103f0565b604080519115158252519081900360200190f35b6101b461040e565b60408051918252519081900360200190f35b610198600480360360608110156101dc57600080fd5b506001600160a01b03813581169160208101359091169060400135610414565b61020461049b565b6040805160ff9092168252519081900360200190f35b6101986004803603604081101561023057600080fd5b506001600160a01b0381351690602001356104a4565b6102636004803603602081101561025c57600080fd5b50356104f2565b005b6101b46004803603602081101561027b57600080fd5b50356001600160a01b03166105f2565b61029361060d565b604080516001600160a01b039092168252519081900360200190f35b6100f7610631565b610198600480360360408110156102cd57600080fd5b506001600160a01b038135169060200135610692565b610263600480360360208110156102f957600080fd5b50356106fa565b6101986004803603604081101561031657600080fd5b506001600160a01b038135169060200135610815565b6101b46004803603604081101561034257600080fd5b506001600160a01b0381358116916020013516610829565b60038054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156103e65780601f106103bb576101008083540402835291602001916103e6565b820191906000526020600020905b8154815290600101906020018083116103c957829003601f168201915b5050505050905090565b60006104046103fd610854565b8484610858565b5060015b92915050565b60025490565b6000610421848484610944565b6104918461042d610854565b61048c85604051806060016040528060288152602001611294602891396001600160a01b038a1660009081526001602052604081209061046b610854565b6001600160a01b031681526020810191909152604001600020549190610a9f565b610858565b5060019392505050565b60055460ff1690565b60006104046104b1610854565b8461048c85600160006104c2610854565b6001600160a01b03908116825260208083019390935260409182016000908120918c168152925290205490610b36565b60006104fc61040e565b905060006105ad826105a77f00000000000000000000000000000000000000000000000000000000000000006001600160a01b03166370a08231306040518263ffffffff1660e01b815260040180826001600160a01b0316815260200191505060206040518083038186803b15801561057457600080fd5b505afa158015610588573d6000803e3d6000fd5b505050506040513d602081101561059e57600080fd5b50518690610b97565b90610bf0565b90506105b93384610c32565b6105ed6001600160a01b037f0000000000000000000000000000000000000000000000000000000000000000163383610d2e565b505050565b6001600160a01b031660009081526020819052604090205490565b7f000000000000000000000000000000000000000000000000000000000000000081565b60048054604080516020601f60026000196101006001881615020190951694909404938401819004810282018101909252828152606093909290918301828280156103e65780601f106103bb576101008083540402835291602001916103e6565b600061040461069f610854565b8461048c8560405180606001604052806025815260200161135060259139600160006106c9610854565b6001600160a01b03908116825260208083019390935260409182016000908120918d16815292529020549190610a9f565b60007f00000000000000000000000000000000000000000000000000000000000000006001600160a01b03166370a08231306040518263ffffffff1660e01b815260040180826001600160a01b0316815260200191505060206040518083038186803b15801561076957600080fd5b505afa15801561077d573d6000803e3d6000fd5b505050506040513d602081101561079357600080fd5b5051905060006107a161040e565b90508015806107ae575081155b156107c2576107bd3384610d80565b6107e0565b60006107d2836105a78685610b97565b90506107de3382610d80565b505b6105ed6001600160a01b037f000000000000000000000000000000000000000000000000000000000000000016333086610e70565b6000610404610822610854565b8484610944565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b3390565b6001600160a01b03831661089d5760405162461bcd60e51b81526004018080602001828103825260248152602001806113026024913960400191505060405180910390fd5b6001600160a01b0382166108e25760405162461bcd60e51b815260040180806020018281038252602281526020018061122b6022913960400191505060405180910390fd5b6001600160a01b03808416600081815260016020908152604080832094871680845294825291829020859055815185815291517f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9259281900390910190a3505050565b6001600160a01b0383166109895760405162461bcd60e51b81526004018080602001828103825260258152602001806112dd6025913960400191505060405180910390fd5b6001600160a01b0382166109ce5760405162461bcd60e51b81526004018080602001828103825260238152602001806111e66023913960400191505060405180910390fd5b6109d98383836105ed565b610a168160405180606001604052806026815260200161124d602691396001600160a01b0386166000908152602081905260409020549190610a9f565b6001600160a01b038085166000908152602081905260408082209390935590841681522054610a459082610b36565b6001600160a01b038084166000818152602081815260409182902094909455805185815290519193928716927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92918290030190a3505050565b60008184841115610b2e5760405162461bcd60e51b81526004018080602001828103825283818151815260200191508051906020019080838360005b83811015610af3578181015183820152602001610adb565b50505050905090810190601f168015610b205780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b505050900390565b600082820183811015610b90576040805162461bcd60e51b815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b9392505050565b600082610ba657506000610408565b82820282848281610bb357fe5b0414610b905760405162461bcd60e51b81526004018080602001828103825260218152602001806112736021913960400191505060405180910390fd5b6000610b9083836040518060400160405280601a81526020017f536166654d6174683a206469766973696f6e206279207a65726f000000000000815250610ed0565b6001600160a01b038216610c775760405162461bcd60e51b81526004018080602001828103825260218152602001806112bc6021913960400191505060405180910390fd5b610c83826000836105ed565b610cc081604051806060016040528060228152602001611209602291396001600160a01b0385166000908152602081905260409020549190610a9f565b6001600160a01b038316600090815260208190526040902055600254610ce69082610f35565b6002556040805182815290516000916001600160a01b038516917fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9181900360200190a35050565b604080516001600160a01b038416602482015260448082018490528251808303909101815260649091019091526020810180516001600160e01b031663a9059cbb60e01b1790526105ed908490610f77565b6001600160a01b038216610ddb576040805162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b610de7600083836105ed565b600254610df49082610b36565b6002556001600160a01b038216600090815260208190526040902054610e1a9082610b36565b6001600160a01b0383166000818152602081815260408083209490945583518581529351929391927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9281900390910190a35050565b604080516001600160a01b0380861660248301528416604482015260648082018490528251808303909101815260849091019091526020810180516001600160e01b03166323b872dd60e01b179052610eca908590610f77565b50505050565b60008183610f1f5760405162461bcd60e51b8152602060048201818152835160248401528351909283926044909101919085019080838360008315610af3578181015183820152602001610adb565b506000838581610f2b57fe5b0495945050505050565b6000610b9083836040518060400160405280601e81526020017f536166654d6174683a207375627472616374696f6e206f766572666c6f770000815250610a9f565b6060610fcc826040518060400160405280602081526020017f5361666545524332303a206c6f772d6c6576656c2063616c6c206661696c6564815250856001600160a01b03166110289092919063ffffffff16565b8051909150156105ed57808060200190516020811015610feb57600080fd5b50516105ed5760405162461bcd60e51b815260040180806020018281038252602a815260200180611326602a913960400191505060405180910390fd5b6060611037848460008561103f565b949350505050565b606061104a856111ac565b61109b576040805162461bcd60e51b815260206004820152601d60248201527f416464726573733a2063616c6c20746f206e6f6e2d636f6e7472616374000000604482015290519081900360640190fd5b60006060866001600160a01b031685876040518082805190602001908083835b602083106110da5780518252601f1990920191602091820191016110bb565b6001836020036101000a03801982511681845116808217855250505050505090500191505060006040518083038185875af1925050503d806000811461113c576040519150601f19603f3d011682016040523d82523d6000602084013e611141565b606091505b509150915081156111555791506110379050565b8051156111655780518082602001fd5b60405162461bcd60e51b8152602060048201818152865160248401528651879391928392604401919085019080838360008315610af3578181015183820152602001610adb565b6000813f7fc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a47081811480159061103757505015159291505056fe45524332303a207472616e7366657220746f20746865207a65726f206164647265737345524332303a206275726e20616d6f756e7420657863656564732062616c616e636545524332303a20617070726f766520746f20746865207a65726f206164647265737345524332303a207472616e7366657220616d6f756e7420657863656564732062616c616e6365536166654d6174683a206d756c7469706c69636174696f6e206f766572666c6f7745524332303a207472616e7366657220616d6f756e74206578636565647320616c6c6f77616e636545524332303a206275726e2066726f6d20746865207a65726f206164647265737345524332303a207472616e736665722066726f6d20746865207a65726f206164647265737345524332303a20617070726f76652066726f6d20746865207a65726f20616464726573735361666545524332303a204552433230206f7065726174696f6e20646964206e6f74207375636365656445524332303a2064656372656173656420616c6c6f77616e63652062656c6f77207a65726fa26469706673582212203f057be2156cfe229f08607685e68a938e999fc107f9ab606d4c125fc8da91e364736f6c634300060c003300000000000000000000000000d7699b71290094ccb1a5884cd835bd65a78c17

00000000000000000000000000d7699b71290094ccb1a5884cd835bd65a78c17

-----Decoded View---------------
Arg [0] : _versa (address): 0x00d7699b71290094ccb1a5884cd835bd65a78c17

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 00000000000000000000000000d7699b71290094ccb1a5884cd835bd65a78c17

30168:1727:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21281:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23387:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;23387:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;22356:100;;;:::i;:::-;;;;;;;;;;;;;;;;24030:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;24030:321:0;;;;;;;;;;;;;;;;;:::i;22208:83::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;24760:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;24760:218:0;;;;;;;;:::i;31518:374::-;;;;;;;;;;;;;;;;-1:-1:-1;31518:374:0;;:::i;:::-;;22519:119;;;;;;;;;;;;;;;;-1:-1:-1;22519:119:0;-1:-1:-1;;;;;22519:119:0;;:::i;30289:29::-;;;:::i;:::-;;;;-1:-1:-1;;;;;30289:29:0;;;;;;;;;;;;;;21483:87;;;:::i;25481:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;25481:269:0;;;;;;;;:::i;30537:867::-;;;;;;;;;;;;;;;;-1:-1:-1;30537:867:0;;:::i;22851:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;22851:175:0;;;;;;;;:::i;23089:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;23089:151:0;;;;;;;;;;:::i;21281:83::-;21351:5;21344:12;;;;;;;;-1:-1:-1;;21344:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21318:13;;21344:12;;21351:5;;21344:12;;21351:5;21344:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21281:83;:::o;23387:169::-;23470:4;23487:39;23496:12;:10;:12::i;:::-;23510:7;23519:6;23487:8;:39::i;:::-;-1:-1:-1;23544:4:0;23387:169;;;;;:::o;22356:100::-;22436:12;;22356:100;:::o;24030:321::-;24136:4;24153:36;24163:6;24171:9;24182:6;24153:9;:36::i;:::-;24200:121;24209:6;24217:12;:10;:12::i;:::-;24231:89;24269:6;24231:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;24231:19:0;;;;;;:11;:19;;;;;;24251:12;:10;:12::i;:::-;-1:-1:-1;;;;;24231:33:0;;;;;;;;;;;;-1:-1:-1;24231:33:0;;;:89;:37;:89::i;:::-;24200:8;:121::i;:::-;-1:-1:-1;24339:4:0;24030:321;;;;;:::o;22208:83::-;22274:9;;;;22208:83;:::o;24760:218::-;24848:4;24865:83;24874:12;:10;:12::i;:::-;24888:7;24897:50;24936:10;24897:11;:25;24909:12;:10;:12::i;:::-;-1:-1:-1;;;;;24897:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;24897:25:0;;;:34;;;;;;;;;;;:38;:50::i;31518:374::-;31618:19;31640:13;:11;:13::i;:::-;31618:35;;31727:12;31742:59;31789:11;31742:42;31753:5;-1:-1:-1;;;;;31753:15:0;;31777:4;31753:30;;;;;;;;;;;;;-1:-1:-1;;;;;31753:30:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;31753:30:0;31742:6;;:10;:42::i;:::-;:46;;:59::i;:::-;31727:74;;31812:25;31818:10;31830:6;31812:5;:25::i;:::-;31848:36;-1:-1:-1;;;;;31848:5:0;:18;31867:10;31879:4;31848:18;:36::i;:::-;31518:374;;;:::o;22519:119::-;-1:-1:-1;;;;;22612:18:0;22585:7;22612:18;;;;;;;;;;;;22519:119::o;30289:29::-;;;:::o;21483:87::-;21555:7;21548:14;;;;;;;;-1:-1:-1;;21548:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21522:13;;21548:14;;21555:7;;21548:14;;21555:7;21548:14;;;;;;;;;;;;;;;;;;;;;;;;25481:269;25574:4;25591:129;25600:12;:10;:12::i;:::-;25614:7;25623:96;25662:15;25623:96;;;;;;;;;;;;;;;;;:11;:25;25635:12;:10;:12::i;:::-;-1:-1:-1;;;;;25623:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;25623:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;30537:867::-;30647:18;30668:5;-1:-1:-1;;;;;30668:15:0;;30692:4;30668:30;;;;;;;;;;;;;-1:-1:-1;;;;;30668:30:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;30668:30:0;;-1:-1:-1;30760:19:0;30782:13;:11;:13::i;:::-;30760:35;-1:-1:-1;30876:16:0;;;:35;;-1:-1:-1;30896:15:0;;30876:35;30872:413;;;30928:26;30934:10;30946:7;30928:5;:26::i;:::-;30872:413;;;31180:12;31195:40;31224:10;31195:24;:7;31207:11;31195;:24::i;:40::-;31180:55;;31250:23;31256:10;31268:4;31250:5;:23::i;:::-;30872:413;;31338:58;-1:-1:-1;;;;;31338:5:0;:22;31361:10;31381:4;31388:7;31338:22;:58::i;22851:175::-;22937:4;22954:42;22964:12;:10;:12::i;:::-;22978:9;22989:6;22954:9;:42::i;23089:151::-;-1:-1:-1;;;;;23205:18:0;;;23178:7;23205:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;23089:151::o;7108:106::-;7196:10;7108:106;:::o;28628:346::-;-1:-1:-1;;;;;28730:19:0;;28722:68;;;;-1:-1:-1;;;28722:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;28809:21:0;;28801:68;;;;-1:-1:-1;;;28801:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;28882:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;28934:32;;;;;;;;;;;;;;;;;28628:346;;;:::o;26240:539::-;-1:-1:-1;;;;;26346:20:0;;26338:70;;;;-1:-1:-1;;;26338:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;26427:23:0;;26419:71;;;;-1:-1:-1;;;26419:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26503:47;26524:6;26532:9;26543:6;26503:20;:47::i;:::-;26583:71;26605:6;26583:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;26583:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;26563:17:0;;;:9;:17;;;;;;;;;;;:91;;;;26688:20;;;;;;;:32;;26713:6;26688:24;:32::i;:::-;-1:-1:-1;;;;;26665:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;26736:35;;;;;;;26665:20;;26736:35;;;;;;;;;;;;;26240:539;;;:::o;9290:192::-;9376:7;9412:12;9404:6;;;;9396:29;;;;-1:-1:-1;;;9396:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;9448:5:0;;;9290:192::o;8387:181::-;8445:7;8477:5;;;8501:6;;;;8493:46;;;;;-1:-1:-1;;;8493:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;8559:1;8387:181;-1:-1:-1;;;8387:181:0:o;9741:471::-;9799:7;10044:6;10040:47;;-1:-1:-1;10074:1:0;10067:8;;10040:47;10111:5;;;10115:1;10111;:5;:1;10135:5;;;;;:10;10127:56;;;;-1:-1:-1;;;10127:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;10688:132;10746:7;10773:39;10777:1;10780;10773:39;;;;;;;;;;;;;;;;;:3;:39::i;27770:418::-;-1:-1:-1;;;;;27854:21:0;;27846:67;;;;-1:-1:-1;;;27846:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27926:49;27947:7;27964:1;27968:6;27926:20;:49::i;:::-;28009:68;28032:6;28009:68;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;28009:18:0;;:9;:18;;;;;;;;;;;;:68;:22;:68::i;:::-;-1:-1:-1;;;;;27988:18:0;;:9;:18;;;;;;;;;;:89;28103:12;;:24;;28120:6;28103:16;:24::i;:::-;28088:12;:39;28143:37;;;;;;;;28169:1;;-1:-1:-1;;;;;28143:37:0;;;;;;;;;;;;27770:418;;:::o;3461:177::-;3571:58;;;-1:-1:-1;;;;;3571:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;3571:58:0;-1:-1:-1;;;3571:58:0;;;3544:86;;3564:5;;3544:19;:86::i;27060:378::-;-1:-1:-1;;;;;27144:21:0;;27136:65;;;;;-1:-1:-1;;;27136:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;27214:49;27243:1;27247:7;27256:6;27214:20;:49::i;:::-;27291:12;;:24;;27308:6;27291:16;:24::i;:::-;27276:12;:39;-1:-1:-1;;;;;27347:18:0;;:9;:18;;;;;;;;;;;:30;;27370:6;27347:22;:30::i;:::-;-1:-1:-1;;;;;27326:18:0;;:9;:18;;;;;;;;;;;:51;;;;27393:37;;;;;;;27326:18;;:9;;27393:37;;;;;;;;;;27060:378;;:::o;3646:205::-;3774:68;;;-1:-1:-1;;;;;3774:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;3774:68:0;-1:-1:-1;;;3774:68:0;;;3747:96;;3767:5;;3747:19;:96::i;:::-;3646:205;;;;:::o;11316:278::-;11402:7;11437:12;11430:5;11422:28;;;;-1:-1:-1;;;11422:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;11461:9;11477:1;11473;:5;;;;;;;11316:278;-1:-1:-1;;;;;11316:278:0:o;8851:136::-;8909:7;8936:43;8940:1;8943;8936:43;;;;;;;;;;;;;;;;;:3;:43::i;5766:761::-;6190:23;6216:69;6244:4;6216:69;;;;;;;;;;;;;;;;;6224:5;-1:-1:-1;;;;;6216:27:0;;;:69;;;;;:::i;:::-;6300:17;;6190:95;;-1:-1:-1;6300:21:0;6296:224;;6442:10;6431:30;;;;;;;;;;;;;;;-1:-1:-1;6431:30:0;6423:85;;;;-1:-1:-1;;;6423:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;16728:196;16831:12;16863:53;16886:6;16894:4;16900:1;16903:12;16863:22;:53::i;:::-;16856:60;16728:196;-1:-1:-1;;;;16728:196:0:o;18105:979::-;18235:12;18268:18;18279:6;18268:10;:18::i;:::-;18260:60;;;;;-1:-1:-1;;;18260:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;18394:12;18408:23;18435:6;-1:-1:-1;;;;;18435:11:0;18455:8;18466:4;18435:36;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;18435:36:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18393:78;;;;18486:7;18482:595;;;18517:10;-1:-1:-1;18510:17:0;;-1:-1:-1;18510:17:0;18482:595;18631:17;;:21;18627:439;;18894:10;18888:17;18955:15;18942:10;18938:2;18934:19;18927:44;18842:148;19030:20;;-1:-1:-1;;;19030:20:0;;;;;;;;;;;;;;;;;19037:12;;19030:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13613:619;13673:4;14141:20;;13984:66;14181:23;;;;;;:42;;-1:-1:-1;;14208:15:0;;;14173:51;-1:-1:-1;;13613:619:0:o

ipfs://3f057be2156cfe229f08607685e68a938e999fc107f9ab606d4c125fc8da91e3