Contract 0x23a13973655da144c53472f2ec7dc6616ab9ab0a 15

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

interface IPinkMultisend {
    function multisendToken(
        address token,
        bool ensureExactAmount,
        address[] calldata targets,
        uint256[] calldata amounts
    ) external payable;

    function multisendEther(
        address[] calldata targets,
        uint256[] calldata amounts
    ) external payable;
}

contract PinkMultisend is Ownable, IPinkMultisend {
    using SafeERC20 for IERC20;

    event Multisent(address token, uint256 total);

    receive() external payable {
        revert();
    }

    function multisendToken(
        address token,
        bool ensureExactAmount,
        address[] calldata targets,
        uint256[] calldata amounts
    ) external payable override {
        if (token == address(0)) {
            multisendEther(targets, amounts);
        } else {
            require(targets.length == amounts.length, "Length mismatched");
            IERC20 erc20 = IERC20(token);
            uint256 total = 0;

            // In case people want to make sure they transfer the exact
            // amount of tokens to the recipients (for example, an owner
            // might forget excluding this contract from the transfer fee
            // deduction), use this option as a safeguard
            function(
                IERC20,
                address,
                address,
                uint256
            ) transfer = ensureExactAmount
                    ? _safeTransferFromEnsureExactAmount
                    : _safeTransferFrom;

            for (uint256 i = 0; i < targets.length; i++) {
                total += amounts[i];
                transfer(erc20, msg.sender, targets[i], amounts[i]);
            }

            emit Multisent(token, total);
        }
    }

    function multisendEther(
        address[] calldata targets,
        uint256[] calldata amounts
    ) public payable override {
        require(targets.length == amounts.length, "Length mismatched");

        uint256 total;
        for (uint256 i = 0; i < targets.length; i++) {
            total += amounts[i];
            payable(targets[i]).transfer(amounts[i]);
        }

        // In case someone tries to claim the ether inside the contract
        // by sending a higher sum of total amount than msg.value
        require(total == msg.value, "Total mismatched");

        emit Multisent(address(0), total);
    }

    function withdrawWronglySentEther(address to) external onlyOwner {
        payable(to).transfer(address(this).balance);
    }

    function withdrawWronglySentToken(address token, address to)
        external
        onlyOwner
    {
        IERC20(token).safeTransfer(to, IERC20(token).balanceOf(address(this)));
    }

    function _safeTransferFromEnsureExactAmount(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) private {
        uint256 balanceBefore = token.balanceOf(to);
        token.safeTransferFrom(from, to, amount);
        require(
            token.balanceOf(to) - balanceBefore == (from != to ? amount : 0), // if from is the same as to, the final balance should be the same as before the transfer
            "Not enough tokens were transfered, check tax and fee options or try setting ensureExactAmount to false"
        );
    }

    function _safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) private {
        token.safeTransferFrom(from, to, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"total","type":"uint256"}],"name":"Multisent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"address[]","name":"targets","type":"address[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"name":"multisendEther","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"bool","name":"ensureExactAmount","type":"bool"},{"internalType":"address[]","name":"targets","type":"address[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"name":"multisendToken","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"withdrawWronglySentEther","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawWronglySentToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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